Technical Tips

Part Clarification

It has been brought to are attention that some incorrect part have been found in the Tillotson HL 394 A, as per the pictures bellow (fig 1 Incorrect, fig 2 Correct). Any part not conforming to the Gazelle fiche must be changed immediately.

Part clarification 394

Due to the origin of these part being unconfirmed, we will be offering and exchange FOC, all incorrect part must be returned to IAME UK for a replacement to be issued.

Clutch Drum X30 solid type

INFO TECH N.  7As recently happened with the KF engines, we will introduce the solid type clutch drum on the X30 engine.

The modification does not affect performance and is compatible with all version. The solid type clutch drum avoids accidental leaking of chain lube on the clutch hub masses.

The homologation form of the X30 engine will be updated with the new component and the previous version will

remain valid.

IAME S.p.A.

Best performance

To keep best performance, ensure the exhaust restrictor remains free from carbon. A quick call to your  engine builder will advise the best way to do this.

Recoil starter update

Over the past 7 months of the engine being on the market we have had several request for competitors, teams and trade, on parts that would enhance the engine with the majority referring to the pull star unit. As the goal of IAME and myself is to ensure we have the best possible product on the market we are investigating the following to improve all aspects of reliability:

 

-Increased specification of pull rope this is in production and all older ropes have been changed under warranty

 

-Clip to replace knot in pull rope this will be available as replacement part and in production from mid May

 

-Tolerance between pawl and location bush this is testing , and will go into production after it’s evaluation

 

-Location tag for recoil spring this will go into production 1st May

 

-Diameter of pulley to allow more rope to be held will go into production 1st May

 

– Pulley wall thickness this will go into production 1st May

 

We understand this has been frustrating time but as you can see and hopefully understand, we are actively working on the recoils as a whole, are normal time from design modification to production is in the region of 5 week with the prototype version being used for 3 of those weeks.  All of the above are to enhance the recoil unit reliability I would like to reassure you that when the new parts are available we will of course exchange any of the older failing parts  under warranty.

Chain Catching

If you are finding the chain is catching the upper edge of the chain guard, it is permitted in the regulations to remove this upper part, from behind the fixing bolt.

 

Chain Catching

Please note this is for reference information only